KSC G26C full auto issue
Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jun 2011
    Location
    Ames, IA
    Posts
    41

    Default KSC G26C full auto issue

    Having an issue with my G26C. The gun functions fine on semi auto, however when I switch to full auto, it works for 2-3 rounds then the slide gets stuck about halfway back. The loading nozzle seems to be quite "sticky" and doesn't move as freely as it probably should. I have tried lubing and cleaning the slide but nothing seems to have done the trick so far. Wondering if anyone could lend a hand here. Thanks!

  2. #2
    Senior Member
    Join Date
    Jun 2011
    Location
    Rock Island IL
    Posts
    101

    Default

    are you using lube or silicon oil ? when its cold out like it is now, "lube" will gum up

  3. #3
    Senior Member
    Join Date
    May 2011
    Posts
    817

    Default

    Does the BBU Cylinder slide easily or does it drag?

  4. #4
    Member
    Join Date
    Jun 2011
    Location
    Ames, IA
    Posts
    41

    Default

    it usually drags a little bit. often times it will get stuck while racking the slide back, prompting me to reach in and bump it back myself. If I use some silicon it will appear to slide freely, but when put to use, the same problems persist.

  5. #5
    Senior Member
    Join Date
    May 2011
    Posts
    817

    Default

    Please perform the proper test by removing the upper fro the lower.

    Then grab the BBU and pull it out. Let go. Does it snap right back or does it stick or drag?

  6. #6

Similar Threads

  1. Barrel/hopup issue
    By Gman29 in forum Technical Discussion
    Replies: 7
    Last Post: 08-17-2019, 09:41 AM
  2. Will I have any problems with putting on a full stock?
    By LoganC in forum Technical Discussion
    Replies: 1
    Last Post: 11-25-2013, 07:15 AM
  3. Replies: 0
    Last Post: 11-10-2013, 07:32 PM
  4. JG Stag15 Compression Issue
    By Gman29 in forum Technical Discussion
    Replies: 8
    Last Post: 06-21-2013, 07:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •