aeg with interchangeable barrel assembly
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Member
    Join Date
    Nov 2013
    Location
    Sioux City, IA
    Posts
    47

    Default aeg with interchangeable barrel assembly

    I'm trying to find an m4 that I can easily change the barrel assembly from field to cqb/integrated suppressor to dmr because I do not want to buy 3 separate guns for different types of game play. Yes I know I would have to change more than the barrel to make it a dmr I'm just saying it would be nice to have that possibility. Please leave a link if you reply

  2. #2
    Local Rushing Russian Willis's Avatar
    Join Date
    Aug 2012
    Location
    Indianola, Iowa
    Posts
    303
    Name
    Will

    Default

    JGs use a two piece hop up and you can swap out upper and barrel just by removing 2 pins. Combined that with a split gearbox and then the upper will have different fps due to different springs
    RusFor!

  3. #3
    Senior Member cooter's Avatar
    Join Date
    Jun 2011
    Location
    Des Moines ia.
    Posts
    116

    Default

    Massada/acr

  4. #4
    Senior Member
    Join Date
    May 2011
    Posts
    817

    Default

    Or just have an assortment of complete uppers.

    Buy having a shorter barrel you can knock the FPS down due "impulse" variables of the mechbox.
    Last edited by Guges mk3; 01-23-2014 at 08:04 AM.

  5. #5
    Member
    Join Date
    Nov 2013
    Location
    Sioux City, IA
    Posts
    47

    Default

    So what you're saying is buy complete uppers that I can switch out. What aeg brands can I find that have this capability I'm very lost.

  6. #6
    Senior Member
    Join Date
    May 2011
    Posts
    817

    Default

    Any M4 of the same "family" can do it with no issues.

    G&P for G&P, JG for JG...etc.

    You can have this AEG:



    And put on the upper from this AEG



    Viola...done.

  7. #7
    Member
    Join Date
    Nov 2013
    Location
    Sioux City, IA
    Posts
    47

    Default

    So I'm probably going to need the battery in the front

  8. #8
    Administrator
    Join Date
    May 2011
    Posts
    96

    Default

    Hot swapping barrels is not something I have seen in a m4 platform. Plus range is more of a hopup thing then a barrel length thing, for the most part. Get a standard 14.5 barrel and you will be Gtg.
    Fornicate quicumque es non nostrum

    Accumen, skill and competence cannot replace character.
    -Duke

  9. #9
    Local Rushing Russian Willis's Avatar
    Join Date
    Aug 2012
    Location
    Indianola, Iowa
    Posts
    303
    Name
    Will

    Default

    Like my JGs I can swap from a m16 to a m4 barrel with different hop ups just by removing two body pins. I think any rifle with a two piece hop up could do the same
    RusFor!

  10. #10
    Senior Member
    Join Date
    May 2011
    Posts
    817

    Default

    You can do it with one piece too. The upper just has to be complete.

Similar Threads

  1. KJW M700 Inner Barrel?????
    By Tye in forum Technical Discussion
    Replies: 7
    Last Post: 11-07-2013, 06:36 AM
  2. Wtb: M4 charging handle assembly
    By Andy in forum Wanted or Trades
    Replies: 1
    Last Post: 09-12-2013, 11:42 PM
  3. Barrel Lapping
    By Airborne101 in forum Technical Discussion
    Replies: 0
    Last Post: 06-30-2013, 01:12 PM
  4. V2 Gearbox Assembly
    By Absit in forum Technical Discussion
    Replies: 6
    Last Post: 03-31-2012, 08:55 PM
  5. 8mm barrel?
    By GearTech in forum Technical Discussion
    Replies: 3
    Last Post: 12-09-2011, 07:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •